Wenzhou Ginri Power Automation Co., Ltd.
Wenzhou Ginri Power Automation Co., Ltd.
Add to Cart
25 Pin Connector Interface Breakout Module Screw Connection To D-Sub JR-25TDC
The interface is called D-Sub because it looks like an uppercase letter D. This is an analog signal or digital signal interface with different numbers of interfaces on demand. D-sub, short for D-subminiature, is a standard for the shape and structure of interfaces. It was invented by ICC in 1952. Since at the time, this interface was small, it was only named subminiature. D-sub contains several subclasses, such as DB25. The first letter D means D-sub, and the second letter B describes the size of the interface--corresponding to the following number (pin number) (A=15 pins, B). =25 needles, C=37 needles, D=50 needles, E=9 needles). Each interface is divided into a plug and a socket.
♦ Features
-- Support most of PLC output interface
-- Standard DIN rain mounted
-- High quality connectors with excellent stability
-- Models available with Phillips screw, slotted screw
-- Greatly savings in wiring and wiring Work
-- Easy for inspection and maintenance
-- Compact slim 49mm width
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors • CNC machine
• Home intelligent control
♦ Technical data
| Model | JR-25TDC |
| Connector type | D-Sub |
| I/O poles | 25 |
| Wiring method |
Euro terminal (slotted screws) *Japanese terminal (Phillips screws) can be customized |
| Rated current | 1A |
| Rated voltage | DC24V |
| Insuration resistance | 100MΩ min. (at 500VDC) |
| Dielectric strength | 500VAC 1min |
| Ambient operating temperature | -20℃~+55℃ |
| Applicable wires | AWG 22-16(0.3~1.25mm2),6~7mm |
| Suitable Uses | PC I/O and axis controller conversion |
| Dimensions(LxWxH) | 90×49×44mm |
| Mounting | DIN rail |
