Wenzhou Ginri Power Automation Co., Ltd.
Wenzhou Ginri Power Automation Co., Ltd.
Add to Cart
Vacuum Digital Pressure Switch Air Negative Adjustable Control Mode 220V
The most popular in the market in the past few years is the electronic pressure switch, which is used to replace the electrical contact pressure gauge and is used in systems with high industrial control requirements. This pressure switch has a built-in precision pressure sensor. It amplifies the pressure signal through a high-precision instrumentation amplifier and collects and processes data through a high-speed MCU. Generally, it uses a 4-digit LED to display the pressure in real time and the relay signal is output. The upper and lower limit control points can be freely set. Low hysteresis, anti-vibration, fast response, stable and reliable, high precision (accuracy generally ± 0.5% FS, high ± 0.2% FS), the use of hysteresis settings can effectively protect against repeated actions caused by pressure fluctuations, protection control The equipment is a high-precision equipment that detects pressure and level signals and realizes pressure and level monitoring and control. The characteristics are: the electronic display is intuitive, with high precision and long service life. It is convenient to set the control point through the display screen, but the relatively high price requires power supply.
♦ Features
-- 4 digital LED display pressure, Accuracy≤0.5%
-- Three pressure units available ( Psi, Kg/cm2 , Mpa)
-- Adjustable high & low pressure threshold and delay time
-- Adjustable control mode:normal control and reverse control
-- Pressure leak and loss protection,secure setting-up
-- Anti-electromagnetic interference design
-- Zero clearing with one button
♦ Protective Functions
● Upper limit alarm(high pressure)
● Lower limit alarm(low pressure)
● Pressure leak alarm
● Pressure loss alarm(no pressure)
♦ Typical Applications
• Machine Automation • Engineering Machinery
• Electromechanical Integration Equipment • Pump&compressor
• Hydraulic System • Medical project • Pipeline engineering
♦ Specification
| Pressure range |
General type:0~1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60Mpa Micro type:0~0.2, 0.5Mpa Negative type: -0.1~0.1Mpa |
| Pressure unit | MPa,kgf/cm2,PSI adjustable |
| Overload pressure | 150% |
| Accuracy grade | ±0.5%FS |
| Power supply | 24VDC,220VAC,380VAC |
| Alarm point | Full range can be set |
| Alarm type | relay signal |
| Load capacity | 380V 3A ,220V 5A ,24V 5A |
| Sampling frequency | 10 times/sec |
| Operating temperature | -20℃-80℃ |
| Compensation Temperature | -10 ~60 ℃ |
| Measurement medium | Gas, water, oil (compatible with 316 stainless steel) |
| Electric protection | Short-circuit protection, reverse polarity protection, anti-electromagnetic interference design |
| Pressure connector | M20*1.5 G1/2,G1/4 (other connector could be customized) |
| Connector material | 304SS |
| Optional module | RS485 Modbus Communication protocol |
| Dial diameter | 100mm |
| Shell material | 304SS |
| Mounting methods | Axial direction or radial direction optional |
| Weight | 0.6Kg |
