Wenzhou Ginri Power Automation Co., Ltd.
Wenzhou Ginri Power Automation Co., Ltd.
Add to Cart
16 Channel DC 24V PLC Relay Module With Connectors Interface Board JR-B16PC-F
After the first PLC PLC amplification board, PLC amplifier board has a lot of advantages, a protection PLC output point, why can protect the PLC output?
PLC amplification boards are all with optical isolation; input and output are amplified through the transmission of light, the input and output are completely isolated, if the amplification tube of the PLC amplification board is blown up, or short circuited, or the load is short-circuited, it is not Will directly damage the PLC, why should add the amplification board to protect the PLC, because PLC is the core of industrial control, quite a human brain, an electric cabinet is also almost the PLC is the most expensive product, PLC is broken, the entire control system is used Can not be used, the machinery can not be used, so we do PLC control system must add PLC amplifier board, control DC load transistor amplifier board or MOS tube amplifier board, control AC with thyristor amplifier board.
The second advantage is that the space is small, as long as the middle relay, solid state relay 4 points 1 space, do some mini PLC control system preferred PLC amplification board, the third advantage is easy to install, the maximum can do 32, 32-way as long as the card to guide the completion of this installation, if you use 32 intermediate relays, you want to card 32 cards, the direct increase of 32 times the efficiency, as well as the wiring is also very convenient, there are some dedicated PLC amplification board, enter 40 lines , With IDC connector, 40 lines in 2 seconds, greatly improve work efficiency
♦ Features
-- Support most of PLC output interface
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self anti-interference
-- Isolation for each relay channel
-- with relay base, easy to replace
-- with RC arc extinction circuit
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
♦ Technical data
| Model | JR-B16PC-F-FX/24VDC |
| Input interface | IDC(MIL) |
| I/O points | 8 |
| Output type | Panasonic Slim Relay |
| Wiring method | Euro terminal (slotted screws) |
| Input signal | NPN and PNP compatible |
| Input voltage | DC24V |
| Output voltage | AC/DC 0-250V |
| Output Contacts | 1NO |
| Contact capacity(resistive) | 3A 250VAC |
| Operation voltage/Release voltage | ≥75%Un/≤10%Un |
| Operation time/Release time | ≤15ms/≤8ms |
| Switching frequency | 0.1Hz |
| Applicable PLC | Mitsubishi FX series |
| Dimensions(LxWxH) | 140×87×52mm |
| Mounting | DIN rail |
